Open the bonnet and remove bonnet struts from the hood. Prop the bonnet open with a prop rod, broom handle or a friend.
Locate where the original badge was mounted and drill a 1.5” hole on the bottom of the bonnet to remove the inner structure only. This is necessary to make room for the new large nylon nut that will keep the leaper in place.
Drill a 11/16” hole through the top of the bonnet to make room for the break away spring on the spring loaded leaper. The nylon nut will attach to this spring.
If necessary, buff out the area where the bonnet badge was.
Mount the new leaper. Be sure not to over tighten the nylon nut.